Adjusting The Vehicle Positioning; Notes On Route Guidance - Clarion NAX943DV Mode D'emploi

Masquer les pouces Voir aussi pour NAX943DV:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 95
ClarionNavi_English.book 31 ページ 2004年3月19日 金曜日 午後4時18分
• If different size tires are used, or when tire
chains are used, the position of the vehi-
cle icon may be misaligned from the
actual vehicle position.
• If the vehicle icon deviates from a road,
the
navigation
system
adjusts and returns it to the road.
• When the vehicle is parked, the vehicle
positioning cannot be adjusted by the
GPS satellites.
Adjusting the vehicle posi-
tioning
WARNING
Do not adjust the vehicle positioning
while driving. It may result in an accident.
Because the vehicle icon may be misaligned
temporarily, try driving approximately 10 km
(6 miles) on an open road.
If this does not adjust the vehicle positioning,
follow the procedures below to adjust it.
1
button
2
[Navigation] key
3
[Adjust Current Location] key
4
Move the cross pointer to the current
vehicle position on the map, and select
the [ENTER] key.
Others / Accuracy of vehicle positioning, Notes on route guidance
5
Select the
the direction.
automatically
6
Select the [ENTER] key.
After setting, the screen will return to the cur-
rent location map screen.

Notes on route guidance

-
The route suggested by the system may
not be the one that is the shortest dis-
tance. Also, it is not calculated taking traf-
fic conditions such as traffic jams, etc.
into consideration.
For the RDS-TMC traffic information,
refer to page E-13.
-
Because of the inevitable difference in
roads and circumstances between the
time you use the system and the time the
DVD-ROM was produced, there may be
discrepancies in roads and regulations. In
such cases, follow the actual information.
-
While calculating a route, the map does
not scroll, but the vehicle icon moves
according to the actual vehicle position.
-
The
tons and the joystick cannot be used
while calculating a route.
-
Depending on the circumstances, it may
take some time to display the suggested
route after the route calculation.
-
The navigation system may suggest a
route that includes residential roads, mili-
tary base areas, or roads under construc-
tion.
-
The navigation system may suggest a
route that includes areas where a vehicle
cannot be driven, such as medians, etc.
-
"Through" is displayed at the position of a
waypoint that has already been passed,
and it will not be considered by the rerout-
or
key, and adjust
,
,
and
but-
E-31

Publicité

Table des Matières
loading

Table des Matières