Setup And Operation - Pentair MAGICSTREAM LAMINAR Guide D'installation

This section describes how to set up and operate the MagicStream® Laminar.
Once the deck is finished, flush any debris from the supply pipe using the pump and filter system that
supplies the Laminar.
NOTE: Any debris in the laminar will hinder its ability to produce a turbulence-free stream.
Laminar Setup
Make sure the supply piping has been flushed clear as directed above.
1. Carefully spread the brackets and slide the Laminar unit into the holes in the brackets (Figure
3), making sure the Laminar orifice is pointed out the top slot in the deck housing lid (Figure 4).
Brackets
Laminar
adjustment
nut
O-ring
Union
winterization plug
Figure 3
Deck housing lid
Laminar
unit
Figure 4
17

Setup and Operation

Path of stream
Make sure the laminar
orifice points out the slot in
the deck housing deck lid.
Slot
Laminar
orifice
Section 3