Transport Wheel Height Adjustment; Operation; Introduction - Champion Power Equipment 100379 Manuel De L'opérateur

100379 - FRONT TiNE TiLLER

Do not attempt to till too deeply too quickly.
Gradually work down to deeper tilling depths.
Place the Depth Regulator Lever in the "travel" position before
starting the engine. This position prevents the tines from
touching the ground until you are ready to begin tilling.
Failure to follow this warning could result in personal injury or
property damage.

Transport Wheel Height Adjustment

The quick store transport wheels allow the operator to easily move
the tiller to and from the garden and stow in moments when its
time to start tilling.
1. Pull spring loaded locking pin away from the tiller body.
2. Swing the wheel assembly upward for tilling depth
adjustment or downward for transport mode. Insert the spring
loaded locking pin to lock wheel height at desired level.
WARNiNG

OPERATiON

Before operating your machine, carefully read and understand
all safety, controls and operating instructions in this Operator's
Manual.
Failure to follow these instructions can result in serious
personal injury

introduction

Read this section before you start the engine. Then, take the time
to familiarize yourself with the basic operation of the tiller before
using it in the garden. Find an open, level area and practice using
the tiller controls without the tines engaging the soil (put tines in
"travel" setting). Only after you've become completely familiar
with the tiller should you begin using it in the garden.
17
OPERATiON
WARNiNG
