Operations And Information Reserved For Qualified Professionals; Technical Operations; Removing The Front Panel Of The Hopper - Invicta P642151 Manuel D'utilisation

10 Operations and information reserved for qualitied professionals.

Technical operations

10.1
Intervention on the hopper, gearmotor, electronic board and smoke extractor should only be done by qualified
professionals.
The electrical supply cable should be disconnected during any maintenance.
Intervention
Removing a foreign object from the
hopper:
Intervention on the gear motor:
Intervention on the electronic board:
Intervention on the extractor

10.1.1 Removing the front panel of the hopper (5.1.1)

SP 06 04 2018
Poêle Cannelé Plug-in
Instructions
• Remove the front panel of the hopper (5.1.1)
• Remove the two screws which hold down the grid and remove the grid
(5.1.2)
• Remove the foreign object
• Carry out these steps in reverse to reassemble
• See point (5.1.3)
• See point (5.1.3)
• Contact the after-sales service.
Note: You must disconnect the stove from the
electrical supply before performing this
operation
Références P642151 & P642152
Page 39 sur
47