General - Pelgrim GK364 Notice D'utilisation

78 maintenance

General

Your appliance has been manufactured from high-grade materials, which are
easy for you to clean.
Burner parts should not be cleaned in the dishwasher. The parts may be
■
damaged by the dishwasher detergent!
Do not use too much water as this can penetrate into the burner or
ventilation openings.
■ Clean the spark plugs preferably with a cloth. Do this carefully. If too much
pressure is applied, the distance from the point of the sparkplug to the
burner may change, causing the burner to ignite poorly or not at all. The
sparkplug will only operate correctly in a dry environment. If the plug is very
dirty, you may clean the point with a tiny brush.
Fit the pan holders over the 'beams' on the glass spillage well.
■
Assemble the burner parts
■
with the aid of the guide
ridges, paying attention to
the cut-out sections in the
burner cap for the spark-
plug and thermocouple.
Make sure that the burner
■
parts lie flat.
Burner cap
Burner ring
Spark plug
Thermocouple
Burner casing
Injector