Tuner Setting; Bluetooth Setting; System Info; Factory Reset - Pioneer X-HM76 Mode D'emploi

> Before Start > Part Names
"Short": Sound that starts quick and seems to move forward
■ Language
Select the language displayed on the display.
English (Default Value), French

■ Tuner Setting

Tuning Mode Set the tuning method for the radio.
"Auto" (Default Value): Radio stations that can be received are
tuned automatically.
"Manual": Tune to stations manually. If the "Tuning Mode" is set to
"Manual", the reception for FM broadcasts will be monaural rather
than stereo, irrespective of the sensitivity of the reception.
AM/FM Freq Step Select the frequency step to suit your area of residence.
"10kHz/0.2MHz" (Default Value), "9kHz/0.05MHz"
0 When this setting is changed, all registered stations are
deleted.
Preset Name You can give names to the stations that you have registered. For
details on how to enter text, refer to " Entering text" ( P31). After
finishing input, press ENTER.

■ Bluetooth Setting

Bluetooth Select whether or not to use the BLUETOOTH function.
"On" (Default Value): Enables connection with a BLUETOOTH
enabled device by using the BLUETOOTH function. Select "On"
also when making various BLUETOOTH settings.
"Off": When not using the BLUETOOTH function
34
> Install > Initial Setup > Playback
Auto Input Change The input of the unit will automatically be switched to
"BLUETOOTH" when connection is made from a BLUETOOTH
enabled device to the unit.
"On" (Default Value): The input will automatically become
"BLUETOOTH" when a BLUETOOTH enabled device is
connected.
"Off": The function is disabled.
0 If the input is not switched automatically, set to "Off" and
change the input manually.
Auto Reconnect This function automatically reconnects to the BLUETOOTH
enabled device connected last when you change the input to
"BLUETOOTH".
"On" (Default Value): Use this function
"Off": Do not use this function
0 This may not work with some BLUETOOTH enabled devices.
Pairing Information
You can initialize the pairing information saved on this unit.
Press / to select "Clear", then press ENTER to initialize the
pairing information stored in this unit.
0 This function does not initialize the pairing information on the
BLUETOOTH enabled device. When pairing the unit again
with the device, be sure to clear the pairing information on the
BLUETOOTH enabled device in advance. For information on
how to clear the pairing information, refer to the BLUETOOTH
enabled device's instruction manual.

System Info

The MAC address of this unit and the current firmware version will be displayed.

Factory Reset

Reset the settings of this unit to the status at the time of shipment. We recommend that you
take a note of the settings you have changed before going ahead with a factory reset. Select
"Start" and confirm to go ahead. The unit will be placed on standby automatically when
initializing is completed.
Advanced Setup | Firmware Update | Others
E
N