Registering A Station - Pioneer X-HM76 Mode D'emploi

> Before Start > Part Names
Tuner FM
87.50
3. Select the station you want to listen to while pressing
TUNE i/j (b) on the remote controller.
0 The frequency changes by 1 step each time you press
the button. The frequency changes continuously if the
button is held down and stops when the button is
released. Tune by looking at the display.

Registering a station

You can register a maximum of 40 stations.
1. Tune into the radio station you want to register.
2. Press MEMORY (c) on the remote controller so that the
preset number on the display flashes.
Tuner FM
87.50
P01
3. While the preset number is flashing (about 8 seconds),
repeatedly press PRESET i/j (a) on the remote
controller to select a number between 1 and 40.
4. Press MEMORY (c) on the remote controller again to
register the station. When registered, the preset number
stops flashing.
> Install
Selecting registered stations
1. Repeatedly press TUNER to switch input between Tuner
FM and Tuner AM.
2. Press PRESET i/j (a) on the remote controller to select
a preset number.
MHz
To delete a registered station
1. Repeatedly press TUNER to switch input between Tuner
FM and Tuner AM.
2. Press PRESET i/j (a) on the remote controller to select
the preset number you want to delete.
3. Press CLEAR (d) on the remote controller to delete the
preset number.
To give a name to a registered station
1. Repeatedly press TUNER to switch input between Tuner
FM and Tuner AM.
2. Press PRESET i/j (a) on the remote controller to select
a preset number.
3. Press SETUP (i) on the remote controller.
4. Press / (f) on the remote controller to select "Option
Setting" - "Tuner Setting" - "Preset Name" and press
ENTER (h).
5. Enter a name for the station. For details on how to enter
text, refer to " Entering text" ( P31).
MHz
> Initial Setup > Playback
Advanced Setup | Firmware Update | Others
E
N
23