Speakers System (X-Hm76) - Pioneer X-HM76 Mode D'emploi

> Before Start > Part Names

Speakers System (X-HM76)

There is no distinction between left and right with the included speaker system. There will be
no difference in sound quality whichever side you choose to put each speaker.
1. Tweeter: Plays the mid range and treble.
2. Woofer: Plays the bass.
3. Grill net fittings: Used to attach the grill nets. When removing the grill net, hold the bottom
of the grill net with both hands and pull gently forward, then gently pull the top of the grill
out to remove. To attach again, attach the top first, then the bottom.
4. Speaker cabinet
5. Bass ref duct: This releases the reverberations that occur within the cabinet to enhance
the reproductive capabilities of the bass range. Do not block the ducts.
8
> Install > Initial Setup > Playback
6. Speaker terminals: Connect speakers to the main unit with speaker cables.
0 You can connect banana plugs by removing the cap on the tip of the jack. When using
banana plugs, first tighten the speaker terminals and then insert the banana plugs.
Advanced Setup | Firmware Update | Others
2 1
1 2
E
N