STEINEL L 620 CAM SC Mode D'emploi page 17

6. Function
Factory settings
Twilight level: 10,000 lux
Time setting: 1 minute
Basic light level: 40%
Android
iOS
Note:
The camera light needs a stable Wi-Fi
connection. The smartphone or tablet
used must have access to the
Internet and be connected to the same
Wi-Fi network as the camera light for the
installation process.
Installation
• Download app.
• The camera light is ready for configu-
ration as soon as the power supply is
switched ON. A signal sounds every
4 seconds during configuration.
• The signal sounds once a second
while the camera light is being con-
nected to the smartphone or tablet.
• Now enter the network name and
password of the Wi-Fi router into
your app.
Camera function
• As soon as the camera has been
set up from a smartphone or tablet,
it can only be shared with other de-
vices from that device via QR code/
serial number.
• Once the sensor has triggered, you
will receive a push notification via
the app.
• Open the app. You can now use the
image display and intercom system.
• The camera films a sequence when
the sensor has been triggered. The
filmed sequence is saved on the
memory card and can be retrieved at
any time. The recorded data is only
saved on the camera light's memory
card.
Note:
You will find further information on the
functions and setting options in the app.
Twilight setting
The chosen response threshold can be
infinitely varied from 10 to 10,000 lux.
Time setting
The time you wish light to stay ON
for can be set to 1 minute, 3 minutes,
10 minutes or 15 minutes. Any move-
ment detected before this time elapses
will restart the timer.
Basic light level
The basic light level function provides
illumination at approx. 0% to 40% light
output when light level falls below the
light-level setting.
17
GB