Inverting The Display (Invert); Switching The Spectrum Analyser On/Off (Spectrum); Activating/Deactivating The; Screen Saver (Screen S) - Blaupunkt St. Louis MP56 Notice D'emploi Et De Montage

Inverting the display ( INVERT)
➔
Press the softkey
"INVERT").
Bright portions of the display
are displayed as dark, dark por-
tions as bright.
Switching the spectrum analyser
on/off ( SPECTRUM)
Instead of displaying the audio
source, the device can display a
5-band spectrum analyser. For this
purpose, the screen saver must be
deactivated (see next section) and
you must activate the display of
the spectrum analyser as follows.
➔
Press the softkey
"SPECTRUM").
•
"SPECTRUM ON": The spec-
trum analyser can be dis-
played.
•
"SPECTRUM OFF": The spec-
trum analyser cannot be dis-
played.
The spectrum analyser automat-
ically appears 16 seconds after
the last button is pushed instead
of the display of the audio source.
You can also display the spectrum
analyser manually:
➔
To do so, press the ESC button
@
while the display of the au-
dio source is shown.
➔
Press any button to switch the
spectrum analyser off.
Changing basic settings in the settings menu
:
(next to
;
(next to

Activating/deactivating the

screen saver ( SCREEN S)
Instead of displaying the audio
source, the device can display a
screen saver. For this purpose,
the display of the spectrum an-
alyser must be deactivated (see
previous section) and you must
activate the display of the screen
saver as follows.
➔
Press the NEXT button
change to the second page of
the "DISPLAY" menu.
➔
Press the softkey
"SCREEN S").
•
"SCREEN SAVER ON": The
screen saver starts immedi-
ately.
•
"SCREEN SAVER OFF": The
screen saver is not shown.
The screen saver automatically
appears 16 seconds after the last
button is pushed instead of the
display of the audio source. You
cannot display the screen saver
manually:
➔
Press any button to interrupt
the screen saver and show
the display of the active audio
source again.
6
to
7
(next to
49