Activating/Deactivating Improved Reception (High Cut); Restricting Station Seek Tuning To Certain Programme Contents (Prog Typ); Toggle Between Mono And Stereo Operation (Mono) - Blaupunkt St. Louis MP56 Notice D'emploi Et De Montage

Activating/deactivating im-
proved reception ( HIGH CUT)
The High Cut function results in
an improved reception in case of
weak radio reception (FM only).
➔
Change to the second page of
the "TUNER" menu by pressing
the NEXT button
➔
In the "TUNER" menu, repeat-
edly press the softkey
to "HIGH CUT").
•
"1": The High Cut function is
switched on and has a low
response sensitivity. If the
reception is very poor, the
interference level is automat-
ically decreased.
•
"2": The High Cut function is
switched on and has a high
response sensitivity. If the re-
ception is poor, the interfer-
ence level is automatically
decreased.
•
"0": The High cut function is
switched off.
Restricting station seek tuning
to certain programme contents
( PROG TYP)
➔
Change to the second page of
the "TUNER" menu by pressing
the NEXT button
➔
In the "TUNER" menu, press
<
the softkey
TYP").
6
.
7
(next
6
.
(next to "PROG
➔
Scroll through the pages of
the programme types with the
NEXT button
➔
Press the softkey next to the
desired programme type.
➔
Next, start a station seek tuning
(see page 23).
Toggle between mono and stereo
operation ( MONO)
If you selected the "FM" wave-
band, you can toggle between
mono and stereo operation.
➔
Change to the second page of
the "TUNER" menu by pressing
the NEXT button
➔
Press the softkey
"TUNER" menu (next to "MONO").
•
"MONO ON": The mono op-
eration is activated. Weak,
noisy stations are played
back more clearly.
•
"MONO OFF": The stereo op-
eration is activated. You are
listening in stereo if the sta-
tion broadcasts in stereo.
Note:
If you switch on the device, this
setting is automatically set to
stereo operation.
Operating the tuner
6
.
6
.
9
in the
29