Listening To Stored Stations; Scanning Receivable Stations (Scan); Confi Guring The Display; Setting The Scanning Time - Blaupunkt Kingston MP47 Mode D'emploi Et De Montage

Radio mode

Listening to stored stations

u
Select the memory bank or waveband.
u
Press one of the station buttons 1 - 6
8.
The stored station is played if it can be re-
ceived.
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefl y. You can set the
scanning time in the menu to between 5
and 30 seconds.
Starting SCAN
u
Press and hold down the MENU/OK
button ; for longer than two sec-
onds.
The radio scans the next receivable station.
"SCAN" and the current frequency are inter-
mittently shown on the display.
Cancelling the SCAN and continuing to
listen to a station
u Press the MENU/OK button ;.
Scanning stops and the radio continues
playing the station that it tuned into last.

Setting the scanning time

u Press the MENU/OK button ;.
u
Press the or
edly until "SCAN TIME" appears on the
display.
u Press the MENU/OK button ; to open
the menu.
u
Set the desired scan time with the
button =.
16
All manuals and user guides at all-guides.com
button < repeat-
or
When you have fi nished making your chang-
es,
u press the ESC/DIS button 5.
Note:
The defi ned scanning time is also ap-
plied by the system to scanning carried
out in CD and CD-changer as well as
MP3 mode.
Confi guring the display
In radio mode, you can choose between
various display options.
• Memory bank or memory location and
frequency
• Memory bank and time
To switch between the display options,
u press the ESC/DIS button 5.