Power Supply; Controls And Displays - Seca 856 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
3. Before you start...
Unpacking
Remove the packaging and place the scale on a firm, level surface.

Power supply

The scale is powered exclusively by batteries.
bAtt
If
or
1.5 V type AAA round-cell batteries.
– Unscrew the bolts which secure the lid of
the battery compartment, and remove.
– Insert the new batteries in the battery
compartment.
Check that polarity is correct!
– Replace the lid of the battery compart-
ment, and bolt this firmly in place.
– Turn the scale to the upright position.
4. Operation

Controls and displays

press briefly  activate/deactivate pre-tare function
hold down
press briefly  activate/deactivate hold function
hold down
press briefly  Switch scale on and off
hold down
Model 856
appear in the display, you should change the batteries. You need 4
Pretare
 store the tare value
 set display to zero, activate/deactivate tare function
 switch between g and oz
13
GB

Publicité

Table des Matières
loading

Table des Matières