Replacing The Hybrid Filter - Boneco H680 Instructions D'utilisation

REPL ACING THE HYBRID FILTER
The HYBRID filter has to be changed after about one year
to ensure that dirt and pollen continue to be filtered from
the air.
The display indicate an upcoming need to replace the
HYBRID filter with the following symbol:
The HYBRID filters is replaced according to Figures 2 –7.

REPLACING THE HYBRID FILTER

1. Remove the front cover of the BONECO H680.
2. Take off the pre-filter.
3. Remove the used HYBRID filter and dispose of it with
your regular household waste.
4. Remove the protective foil from the new HYBRID filter.
5. Insert the HYBRID filter into the holder as shown on the
label.
6. Reinsert the pre-filter and the front cover.
7. Simultaneously press the and
pliance for 5 seconds to hide the filter change symbol.
buttons on the ap-
45
en