Step 3: Changing The Cleaning Time; Step 4: Cleaning - Boneco H680 Instructions D'utilisation

DESCALING AND CLE ANING THE APPLIANCE (CONTINUED)

STEP 3: CHANGING THE CLEANING TIME

The default setting for the cleaning time is 4 hours. To
strengthen or shorten the cleaning, adjust the duration of
cleaning using the and buttons.
• Shorten the duration of cleaning if the BONECO H680
is only slightly dirty.
• Increase the duration of cleaning if the evaporator mat
is heavily caked with lime. The maximum duration of
cleaning is 12 hours.
The fan is switched off during cleaning.
After cleaning has finished, the cleaning symbol on the
display goes away automatically.

STEP 4: CLEANING

1. Take the BONECO H680 apart as described in Part 1.
2. Take the evaporator mat off the drum and thoroughly
clean the mat under running water or in a dishwasher.
3. Remove the float and the pair of shafts for the drum
rollers.
4. Thoroughly clean the water tray and all moving parts
with hot water and dish detergent.
5. Reinsert the Ionic Silver Stick ® and the moving parts.
Ensure that the float can move freely after being re-
inserted; otherwise the appliance may malfunction
during operation!
6. Put the appliance back together by following the steps
in reverse order.
The BONECO H680 has now been descaled and is ready
for use again.
43
en