Emergency Lowering; Cleaning And Maintenance - lopital Luxal Mode D'emploi

4.2. Emergency lowering

If the controls stop working and the stretcher is in a raised
position, it can be lowered using the emergency lowering
button . This button is located to the left of the emergency
stop (See figure 11) .
First check to ensure that the emergency button has not been
pressed!
• Remove the plug from the handcontrol
• Press the emergency lowering button .
The stretcher will now return to the lowest position (make sure no persons or objects are
under the stretcher) .
Take the client from the stretcher and make sure the device is not used until it has been
repaired . Place the stretcher in a safe place and indicate that it is out of order .
Contact the technical service or Lopital's service department .
E-mail: service@lopital .nl
5. Cleaning and maintenance
The Luxal must be cleaned after every use, with water and regular household cleaning
agents . Remove excess soap residues . Do not use any abrasive or other aggressive
cleaning products (e .g . chlorine bleach) . Practical experience has shown that regular
household cleaning agents with limited alcohol content (max . 5%) are most suitable
for this purpose . The product Neoquat combi
(on the basis of long-term testing) . For the best and most efficient cleaning of the
mattress and the bed base, the mattress can be lifted up and removed . Dry the plate on
which the mattress lies .
Check the wheels regularly for hairs and dust and remove when necessary . Maintenance
and repairs to the Luxal may only be carried out by authorised personnel .
is recommended for disinfection purposes
®
Luxal Shower stretcher | Instructions for use | 33
Figure 11
Emergency lowering button .