Horizon Fitness 7.0AF Manuel Du Propriétaire page 7

ASSEMBLY
WARNING
There are several areas during the assembly process that special attention must be paid. It is very important to follow
the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not
followed correctly, the incline trainer could have frame parts that are not tightened and will seem loose and may cause
irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions
should be taken.
Before proceeding, find your elliptical's serial number located on a white barcode
sticker on the front stabilizer tube and enter it in the space provided below.
ENTER YOUR SERIAL NUMBER IN THE BOX BELOW:
SERIAL NUMBER:
EP
HORIZON 7.0AE ELLIPTICAL
MODEL NAME:
» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
SERIAL NUMBER LOCATION
7