Horizon Fitness 7.0AF Manuel Du Propriétaire page 18

ASSEMBLY STEP 9
PART TYPE
FF SCREWS
18
HARDWARE FOR STEP 9
DESCRIPTION
M5X0.8PX12L
19 17
5
FF
5
6
12
NOTE:
QTY
All hardware for this step is pre-installed.
4
Slide the RIGHT UPPER HANDLEBAR (17) onto the
A
LEFT LOWER HANDLEBAR (12). Using pre-attached
1 BOLT and 1 SET SCREW (18) connect the UPPER
AND LOWER HANDLEBARS (17&12) as shown in
the diagram. Do not tighten set screw until the bolt is
installed
Repeat step A on the opposite side.
B
Connect the 3 CONSOLE CABLES (5).
C
Carefully tuck the CONSOLE CABLES (5) into the
D
CONSOLE MAST (6) before attaching the CONSOLE (19).
18
Attach CONSOLE (19) to CONSOLE MAST (6) using
18
4 SCREWS (FF).
FF