Horizon Fitness 7.0AF Manuel Du Propriétaire page 13

ASSEMBLY STEP 4
HARDWARE FOR STEP 4
PART TYPE
K WAVY WASHER
FLAT WASHER
L
M SPRING WASHER
N BOLT
7
7
N
M
L
K
DESCRIPTION QTY
17.2X22.5X.5T 2
8.2X20.0X1.5T 2
8.2X15.4X2.0T 2
M8X1.25PX20T 2
6
5
2
8
K
L M
N
9
Open HARDWARE FOR STEP 4.
A
Carefully pull the CONSOLE CABLE (5) through the
B
CONSOLE MAST (6) using the twist tie located inside
the CONSOLE MAST (6).
Attach CONSOLE MAST (6) to MAIN FRAME (2)
C
using PRE-INSTALLED BOLTS AND WASHERS (7).
Slide WAVY WASHER (K) over CRANK (8) followed by
D
LOWER LINK ARM (9) as shown. Rest pedal arm wheel
on guide rail.
Attach the LOWER LINK ARM (9) to the CRANK (8)
E
using 1 FLAT WASHER (L), 1 SPRING WASHER (M)
and 1 BOLT (N).
Repeat steps D–E on the opposite side of the elliptical.
F
N M L K
13