Luminance Brands KATHY IRELAND ATOMICAL LED CF930LBS00 Mode D'emploi page 9

3. Ceiling Fan Assembly
3.13
Route the Three Motor Wires through the Hanger Ball
(Figure 13) .
Reinstall the Hanger Ball on the 4 .5" Downrod as
follows:
Position the Pin through the Two Holes in the
4 .5" Downrod and align the Hanger Ball so the Pin is
captured in the Groove in the top of the Hanger Ball
(Figure 13) .
Pull the Hanger Ball up tight against the Pin and
securely retighten the Phillips Head Set Screw in the
Hanger Ball (Figure 13) .
A loose Phillips Head Set Screw could create fan
wobble .
3.14
The Fan comes with Black, Blue and White Wires that
are 80-inches long .
Before installing the Fan, measure up approximately
6 to 9-inches above top of Hanger Ball/Downrod
Assembly (Figure 14) .
Cut off excess Wires and strip back insulation 1/2-inch
from end of Wires .
(Continued)
Figure 13
6 TO 9
INCHES
1/2
INCH
Figure 14
Please contact 1-800-777-4440 for further assistance
9
BLACK WIRE
BLUE WIRE
WHITE WIRE
HANGER BALL
luminancebrands.com
U.L. Model No.: CF930L