Luminance Brands KATHY IRELAND ATOMICAL LED CF930LBS00 Mode D'emploi page 16

5. How to Wire Your Ceiling Fan
5.9
While inserting the Receiver fully into the Hanger
Bracket, turn Wires upward and carefully push Wires
into the Outlet Box, with the White and Green Wires
on one side of the Outlet Box and position the Black
and Blue Wires on the other side of the Outlet Box
(Figure 26) .
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
5.10
Wiring Schematic for reference (Figure 27) .
BLACK
(HOT)
TO
120-VOLT
SUPPLY
WHITE
Figure 27
STANDARD ON-OFF WALL
SWITCH OR OPTIONAL
SW405 WALL CONTROL
GROUND
TWO-CONDUCTOR
CABLE
(WITH GROUND)
GREEN WIRE (GROUND) FROM
HANGER BALL AND HANGER
BRACKET
Figure 26
BLACK
BLACK
WHITE
WHITE
RED or BLACK
BLUE
BLACK
BLUE
WHITE
HANGER BALL
16
(Continued)
WIRE
CONNECTORS
(Tucked Inside
Outlet Box)
WHITE
U.L. Model No.: CF930L