Luminance Brands KATHY IRELAND ATOMICAL LED CF930LBS00 Mode D'emploi page 17

6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the
Ceiling Cover (Figure 29) .
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied) . (Figure 29) .
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod .
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
1-1/4"
THREADED
STUD (2)
#8 EXTERNAL
TOOTH
LOCKWASHER (2)
Figure 29
Please contact 1-800-777-4440 for further assistance
17
CEILING
COVER
#8-32 KNURLED
KNOB (2)
luminancebrands.com
U.L. Model No.: CF930L