Luminance Brands KATHY IRELAND ATOMICAL LED CF930LBS00 Mode D'emploi page 7

3. Ceiling Fan Assembly
3.7
Separate, untwist and unkink the Three 80" Motor
Wires .
Route the Three 80" Black, Blue, and White Motor
Wires through the 4 .5" Downrod (Figure 7) .
3.8
Loosen the Two Phillips Head Set Screws in the Motor
Coupler for installation of the 4 .5" Downrod (Figure 8) .
Seat the 4 .5" Downrod in the Motor Coupler (Figure 8) .
Rotate and align the 4 .5" Downrod holes with the Two
Holes in the Motor Coupler (Figure 8) .
3.9
Align the Clevis Pin Holes in the 4 .5" Downrod with the
Holes in the Motor Coupler .
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 9) .
The Clevis Pin must go through the Motor Coupler
Holes . It is critical that the Clevis Pin in the Motor
Coupler is properly installed and securely tightened .
WARNING
!
It is critical that the clevis pin in the motor coupler
is properly installed. Failure to verify that the pin is
properly installed could result in the fan falling.
(Continued)
THREE 80" MOTOR
WIRES (UNTWISTED)
Figure 7
Figure 8
Please contact 1-800-777-4440 for further assistance
7
4.5" DOWNROD
luminancebrands.com
U.L. Model No.: CF930L