Luminance Brands KATHY IRELAND ATOMICAL LED CF930LBS00 Mode D'emploi page 19

6.5
Rotate the LED Light Fixture Assembly clockwise on
the Lower Housing by engaging the Two loosened
#8-32 x 10 mm Serrated Pan Head Screws onto the
Key Hole Slots (Figure 32) .
Reinstall the previously removed #8-32 x 10 mm
Serrated Pan Head Screw (Figure 32) .
Secure the LED Light Fixture Assembly by tightening
the Three #8-32 x 10 mm Serrated Pan Head Screws
(Figure 32) .
A spare #8-32 x 10 mm Serrated Pan Head Screw
supplied in parts bag, if needed .
6.6
Place the Shade into the opening in the Lower Housing,
aligning the Three Flat Areas on the top edge of the
Shade with the Lower Housing Three Raised Dimples
and turn the Shade Clockwise until it stops (Figure 33) .
NOTE: Periodically check that the Shade is seated
fully clockwise in the Lower Housing.
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and
operation of this Ceiling Fan .
LED LIGHT
FIXTURE
ASSEMBLY
ROTATE CLOCKWISE
Figure 32
LED LIGHT
FIXTURE
ASSEMBLY
FLAT AREA (3)
ROTATE CLOCKWISE
Figure 33
Please contact 1-800-777-4440 for further assistance
19
RETIGHTEN TWO
#8-32 x 10 mm SERRATED
PAN HEAD SCREWS
REINSTALL ONE
#8-32 x 10 mm
SERRATED PAN
HEAD SCREW
RAISED DIMPLES (3)
SHADE
luminancebrands.com
U.L. Model No.: CF930L