Luminance Brands KATHY IRELAND ATOMICAL LED CF930LBS00 Mode D'emploi page 13

5. How to Wire Your Ceiling Fan
5.3
NOTE: Make all wiring connections using the
wire connectors supplied in the hardware kit and
receiver parts bag. Make sure that all connections
are tight, including ground, and that no bare wire is
visible at the wire connectors, except for the supply
circuit ground wire.
C o n n e c t t h e G r e e n G r o u n d W i r e f r o m t h e
Hanger Ball and the Green Ground Wire from the
Hanger Bracket to the Ground Conductor of Supply
(this may be a bare wire or wire with Green Colored
insulation) . Securely connect Wires with the 12 ga .
Wire Connector (supplied in parts bag) (Figure 20) .
5.4
Securely connect the Receiver White Wire (AC IN N) to
the Supply White Wire (neutral) using the 12 ga . Wire
Connector (supplied in parts bag) (Figure 21) .
HANGER BALL, HANGER BRACKET, & SUPPLY GREEN
GROUND WIRES
Figure 20
Figure 21
Please contact 1-800-777-4440 for further assistance
13
(Continued)
12 ga. WIRE
CONNECTOR
12 ga. WIRE
CONNECTOR
SUPPLY AND RECEIVER
WHITE WIRES
luminancebrands.com
U.L. Model No.: CF930L