Luminance Brands KATHY IRELAND ATOMICAL LED CF930LBS00 Mode D'emploi page 18

6.3
NOTE: If installing Ceiling Fan without the LED
Light Fixture Assembly, An Accessory No-Light
Cover may be purchased separately.
Securely connect the LED Light Fixture Assembly
White Wire Terminal to the Fan Motor Assembly White
Wire Terminal (Figure 30) .
Securely connect the LED Light Fixture Assembly Black
Wire Terminal to the Fan Motor Assembly Blue Wire
Terminal (Figure 30) .
6.4
Remove One of the Three #8-32 x 10 mm Serrated
Pan Head Screws in the Lower Housing and loosen
the remaining Two #8-32 x 10 mm Serrated Pan Head
Screws (Figure 31) .
Retain the #8-32 x 10 mm Serrated Pan Head Screw
for future use .
Tuck wires into the LED Light Fixture Assembly and
position in the Lower Housing Assembly .
NOTE: Make sure wires and terminals are
positioned under the LED Light Fixture Assembly
and not pinched between LED Light Fixture
Assembly and Lower Housing.
Figure 30
REMOVE ONE
#8-32 x 10 mm
SERRATED PAN
HEAD SCREW
LED LIGHT
FIXTURE
ASSEMBLY
Figure 31
18
LOOSEN TWO
#8-32 x 10 mm
SERRATED PAN
HEAD SCREWS
U.L. Model No.: CF930L