Luminance Brands KATHY IRELAND ATOMICAL LED CF930LBS00 Mode D'emploi page 15

5. How to Wire Your Ceiling Fan
5.7
Securely connect the Receiver Black Wire (TO
MOTOR L) to the Fan Motor Black Wire using the
18 ga . Wire Connector (supplied with the receiver)
(Figure 24) .
5.8
Securely connect the Receiver Blue Wire (TO LIGHT)
to the Fan Motor Blue Wire using the 18 ga . Wire
Connector (supplied with the receiver) (Figure 25) .
Position the Antenna Wire on top of the Receiver . Slide
the RCFP Receiver completely onto the Hanger Ball,
nestled in the Hanger Bracket (Figure 25) .
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the supply circuit ground wire.
Do not operate fan until blades are in place.
Noise and fan damage could result.
NOTE: Failure to properly connect the Receiver
Wires will damage the device and render it non-
operable.
Figure 24
Figure 25
Please contact 1-800-777-4440 for further assistance
15
(Continued)
SUPPLY AND RECEIVER
BLACK WIRES
18 ga. WIRE CONNECTOR
ANTENNA WIRE
RECEIVER
SUPPLY AND RECEIVER
BLUE WIRES
18 ga. WIRE CONNECTOR
luminancebrands.com
U.L. Model No.: CF930L