5 Operation
86
5.2.2
Key assignment
The assignment of the function keys is as follows:
Exit the menu
level
Fig. 25:
Key assignment
5.3
Local operation
5.3.1
Enable configuration
If necessary, enter the 4-character user code (see Chapter 5.3.2).
5.3.2
Lock configuration
Enter a 4-character user code on the control console to lock the device configuration (See »Descrip-
tion of device functions« on page 103.). Enter the user code using the CODE function in the menu
level SET - BASIC SETTINGS.
5.4
Confirmation of error messages
Acknowledge error messages on the controller display by pressing the operating key beneath the OK
field.
5.5
Communication using ReadWin
Besides by means of local operation, you can also remotely configure the device and poll measured
values using a PC with the Endress+Hauser operating software ReadWin
is a universal PC programme for remote device operation. The interface for remote configuration is
the RS232 connection socket. You can find detailed information on operating the device using Read-
®
Win
2000 on the CD-ROM with the device software supplied.
5.6
Calibration
5.6.1
Tap calibration
You must calibrate the tap if:
Move bar up;
increase active
character or
value
Move bar
Accept selected
down; decre-
setting or value
ase active cha-
racter or value
®
ASP Station 2000
2000
®
®
2000. ReadWin
2000
Endress+Hauser