Endress+Hauser ASP Station 2000 Mode D'emploi page 84

5 Operation
84
Report
Overflow security
Set up changed
Manual sampling
Automatic sampling
No flow
Distribution tap
Start automatic
End automatic/cancel
Programme switch
Fault
calibration
General fault
Ext. signals
The messages that appear on the display can be acknowledged by pressing the "OK" key.
"Stat" key
Fig. 20: "Stat" key
The statistics are deleted for the following events:
• Programme start
• 1st bottle is reached, if "Programme end: no" is set as the programme end in the programme set-
tings.
The statistics are displayed as follows:
Fig. 21: Bottle statistics
The bottle number is displayed in the first column (no.).
The second column (smp.) indicates how often sampling was triggered per bottle.
Report on the display
14:12 11.01.98
Calibrate: 0-1V input
14:12 11.01.98
Clock IC fault
14:12 11.01.98
Event text
(see digital input)
The bottle statistics of the sampler are displayed once the
"Stat" key is actuated. Statistics are displayed for each indivi-
dual bottle since the programme start. In this way, the user
can draw conclusions on the last samplings.
ASP Station 2000
Report list
14:12 11.01.98
Overflow security
14:12 11.01.98
Set up changed
14:12 11.01.98
Start: Prog xx
14:12 11.01.98
End: Prog xx
14:12 11.01.98
-> Event prog.
14:12 11.01.98
Event text
(see digital input)
Endress+Hauser