Grizzly ERM 1637 G Traduction De La Notice D'utilisation Originale page 24

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 47
GB
surfaces to be mowed.
Always keep the grass ejection
hole clean and clear. Remove
cut material only when the
equipment is stopped.
Do not leave the equipment
unattended in the workplace.
Do not work with equipment
that is damaged, incomplete,
or has been modified without
the authorisation of the manu-
facturer. Do not use the equip-
ment with damaged safety
devices or screens or with
missing safety equipment such
as deflection and/or grass col-
lection devices.
Do not overload the equip-
ment. Work only within the
specified power range and do
not change the regulator set-
tings on the motor. Do not use
low-powered machines for
heavy work. Do not use your
equipment for purposes other
than those for which it is de-
signed.
Do not use the equipment near
inflammable liquids or gases.
Non-observance will result in a
risk of fire or explosion.
Do not lift or carry the equip-
ment when the motor is run-
ning.
Turn off the appliance, unplug
it from the mains and check
that all moving parts are at
rest:
- Whenever you leave the ma-
chine,
- Before cleaning the
tion hole or removing block-
ages,
- When the equipment is out of
24
use,
- Before checking, cleaning or
working on the equipment,
- If the power cable is dam-
aged or frayed,
- If the equipment has hit a
foreign object or if strange
vibrations occur during work.
In this case, check the equip-
ment for damage and have it
repaired if applicable.
Do not place feet or hands
near or under rotating parts.
Do not stand in front of the
grass ejection hole during sick-
le mowing.
Maintenance and Storage:
When servicing the blades,
remember that they can
move even if the power
source is off.
Ensure that all nuts, bolts and
screws are tightened firmly and
the equipment is in safe work-
ing condition.
Check the mower for any dam-
ages.
Repair damaged parts as ap-
propriate.
Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specified in these
instructions is to be carried out
only by customer service cen-
tres that we have authorised.
Keep the equipment in a dry
ejec-
location and out of reach of
children.
Handle the equipment with
care. Keep tools sharp and

Publicité

Table des Matières
loading

Table des Matières