Grizzly BRM 4210-20 Traduction De La Notice D'utilisation Originale page 85

several cutting tools, as the movement
of one blade may result in rotation of
other blades.
• Use only replacement parts and ac-
cessories supplied and recommended
by the manufacturer. The use of parts
from other manufacturers may result
in injuries and will result in immediate
invalidation of the guarantee.
Handling:
• Do not run the combustion engine in
enclosed spaces, in which dangerous
carbon monoxide can collect.
• Mow only in daylight or with good arti-
ficial lighting. An unlit working area can
result in accidents.
• If possible, avoid using the equipment
on wet grass.
• Always ensure secure positioning, par-
ticularly on hillsides, landfills, ditches or
dykes. This will give you better control of
the equipment in unexpected situations.
- Always work across the slope, never
upwards or downwards.
- Take particular care when changing
the direction of travel on the slope.
- Do not mow on excessively steep
slopes (max. 10°).
• Run the equipment only at walking
speed.
• Take particular care when turning the
equipment around or pulling it towards
you.
• Stop the cutting tool if the equipment
has to be tipped up for transportation
over a surface other than grass and
when moving the equipment from and to
the surface to be mown.
• Do not use the equipment with damaged
safety equipment or guards or with no
safety equipment attached, e.g. impact
protection and/or grass catchers. This en-
sures that the equipment remains safe.
• Do not change the engine regulator
setting and do not over-rev it. This may
damage the equipment.
• Before starting, the engine, disengage
all cutting tools and drives.
• Start or operate the start switch with
care and in accordance with the manu-
facturer's instructions. Ensure sufficient
space between feet and the cutting tool.
Risk of injury.
• When starting or activating the engine,
do not tip the equipment unless the
equipment has to be lifted for this proce-
dure. In this case, tip the equipment only
as far as is absolutely necessary and lift
only the side that is away from the user.
• Do not start the engine when standing in
front of the ejection channel.
• Switch on the engine in accordance with
the instructions and only if your feet are a
safe distance away from the cutting tools.
• Do not place hands or feet under rotat-
ing parts. Always keep away from the
ejection opening. A moment of careless-
ness when using the equipment may
result in serious injury.
• Do not leave or carry the equipment
when the engine is running.
• Switch off the engine, take out the spark
plug connector and ensure that all mov-
ing parts are still:
- Before releasing blockages or remov-
ing obstructions in the ejection channel;
- Before checking, cleaning or working
on the equipment;
- If a foreign body is struck. Look for
damage to the equipment and carry out
the necessary repairs before restart-
ing and working with the equipment;
- If the equipment starts to vibrate unu-
sually strongly, an immediate check is
required.
• Switch off the engine, take out the spark
plug connector and ensure that all mov-
ing parts are still:
- When leaving the equipment;
- Before refuelling;
GB
85