Lighted Key Pad; Base Lights; Page/Handset Locator; Telephone Operations - Clarity POWER 420 Guide De L'utilisateur

the call before you answer. The display also
functions as call timer when the handset is off
hook or on a call.

Lighted Key Pad

The key pad will light for fifteen (15) seconds
after removing the handset from the base. To
reactivate the feature while in standby, press
the TALK or the MEM button. To activate
while the phone is in use, press any key.

Base Lights

POWER ON – Base power is on.
IN USE/ CHARGING ON – When handset is
in the base charging, the LED will shine RED
when the handset is on a call the LED will
shine GREEN.

Page/Handset Locator

To send a page signal from the base to the
handset, press the PAGE button located on
the base of the telephone. A series of rings
will sound from the handset.
To locate the handset if it is away from the
base, press and hold the PAGE button for
approximately five (5) seconds. A series
of rings will sound. Return the handset to
the base or press the TALK button to cancel
the page.
16

Telephone Operations

Channel Operation

The Clarity 420 cordless telephone auto-
matically searches and selects the clearest
of 40 channels when it is being used. If inter-
ference develops on the line, pressing this
button will move to another channel.

Security Code

The security code prevents your cordless
phone conversations from being accessed
by a phone on a different line. Once the
handset battery is fully charged, the handset
will automatically select the code from
over 65,000 different combinations. The
code is changed every time the handset is
placed in the cradle.
If you have trouble with placing or receiv-
ing calls, a lost security code may be the
cause of the problem. When this occurs, the
handset can no longer communicate with the
base. Reset by placing the handset on the
base for 5-10 seconds. If that does not work,
unplug the AC adapter from the wall outlet.
Disconnect the handset battery for
5-10 seconds, and then reconnect. Place
hand-set back on the base and then reinsert
the AC adapter.