Safety Instructions - Clarity POWER 420 Guide De L'utilisateur

by the operating instructions. Improper adjust-
ment may require extensive work by a quali-
fied technician to restore the telephone to
normal operation.
E. If the telephone has been dropped or the
case has been damaged.
F. If the telephone exhibits a distinct change
in performance.
15. Never install telephone wiring during a
lightning storm.
16. Never install telephone jacks in wet loca-
tions unless the jack is specifically designed
for wet locations.
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to the instructions.
1. Use only the approved battery pack in the
handset of your cordless phone.
For Handset Unit: 3.6V 600mAHr
NiMH Rechargeable Battery
GP60AAAH3BMJZ
GPI International Ltd
3SN-AAA60H-S-J 1
Sanik Battery Co., Ltd.
2. Do not dispose of the battery in a fire as
it may explode. Check with local codes for
possible special disposal instructions.
4
Important Safety Instructions
Safety Instructions For Batteries
SAVE THESE INSTRUCTIONS
17. Never touch un-insulated telephone wires
or terminals unless the telephone line has
been disconnected at the network interface.
18. Use caution when installing or modifying
telephone lines.
19. Use only the power cord and batteries
indicated in the manual. Do not dispose of
batteries in a fire. They may explode. Check
with local codes for possible special disposal
instructions.
20. Plug the AC adaptor into the outlet that is
nearest and most accessible to the telephone.
3. Do not open or mutilate the battery.
Released electrolyte is corrosive and may
cause damage to the eyes and skin. It may
be toxic if swallowed.
4. Exercise care in handling batteries in
order not to short the battery with conducting
materials such as rings, bracelets and keys.
The battery or conduction material may over-
heat and cause burns.
5. Charge the battery (ies) provided with or
identified for use with this product only in
accordance with the instructions and limita-
tions specified in this manual.
6. Observe proper polarity orientation
between the battery pack and the
battery charger.