Lincoln Electric VANTAGE 400 CE Manuel D'utilisation page 16

Model Numbers
VANTAGE 400 CE
VANTAGE 500 CE
Receptacles
Residual Current Device (RCD)
Circuit Breakers (Thermal/Magnetic)
Other Circuit Breakers
(1)
Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up
to rated capacity. When welding, available auxiliary power will be reduced.
(2)
Reduced to less than 32V in the CC-stick Mode when VRD (VOLTAGE REDUCTION DEVICE) is on.
(3)
To Top of enclosure. Add 186.7 mm to top of exhaust. Add 98.3mm to top of Lift Bail.
(4)
Center-Tapped to ground.
MACHINE SPECIFICATONS
K2502-1 (UK)
K2503-1 (UK)
400V (3 phase) x 1
230V (1 phase) x 1
115V x 1
14 Pin connector
6 Pin connector
3 phase, 25 A x 1
1 phase, 15 A x 3
A-8
K2502-2 (EUROPE)
K2502-3 (EUROPE)
400V (3 phase) x 1
230V (1 phase) x 1
(4)
14 Pin connector
6 Pin connector
4-pole, 25A
(30mA trip current)
3 phase, 25 A x 1
1 phase, 15 A x 2
10A for Battery Charging Circuit
10A for Wire Feeder Power