Luminance Brands DORIAN ECO CF515BS00 Manuel Du Propriétaire page 8

3. Ceiling Fan Assembly
3.8
Slide the Clevis Pin through the Motor Coupler Holes .
Install the Hairpin Clip through the Clevis Pin Holes to
secure (Figure 8) .
NOTE: The Clevis Pin must go through the holes in
the Motor Coupler. It is critical that the Clevis Pin is
properly installed and secure.
WARNING
!
It is critical that the clevis pin is properly installed and
secured with the hairpin clip. Failure to verify that the
clevis pin is properly installed could result in the fan
falling.
3.9
Retighten the Two Phillips Head Set Screws evenly to
secure the Downrod to the Motor Coupler in a vertical
position (Figure 9) .
WARNING
!
It is critical that the set screws in the motor coupler are
securely tightened. Failure to verify that the set screws
are properly installed could result in the fan falling.
(Continued)
HAIRPIN
CLIP
CLEVIS
PIN
CLEVIS PIN
MOTOR COUPLER
Figure 8
DOWNROD
RETIGHTEN
PHILLIPS HEAD
SET SCREWS (2)
Figure 9
8
HAIRPIN
CLIP
MOTOR COUPLER
ETL Model No.: CF515