Production Description; Technical Data - EUROM 33.394.7 Manual D'instructions

Steel housing
The casing, particularly the front of the device, will get extremely hot, up to 360°C!
For safety reasons, the lowest point of the Outdoor heat panel must always remain
at least 180 cm above the ground, whether secured to the wall or ceiling.

Production description

Your device is an elegant answer to all your heating needs, both indoor and out.
The device can be secured to a wall as well as a ceiling or roof covering. It fulfils
the CE standards and the IPX4 requirements and that means that it can also be
mounted in a humid environment. The device is not designed to be exposed to
heavy downpours or hang outdoors for the entire season without any protection.
The device is best placed under a porch, car-port or other covering, i.e. in semi-
open spaces/conservatories, workplaces and similar.
Use the device exclusively for the purposes for which it was designed, i.e. heating a
household or semi-commercial space or terrace. Do not hang textiles or similar
over the device to dry them and bear in mind the minimum distances to the device!

Technical data

Type Outdoor Heatpanel
Power
Voltage
IP class
Front
Backside
Dimensions 114,5x17,2x4,5 cm
Weight
Outdoor
Heatpanel (RC)
1800 Watt
steel
9,2 kg
Aluminium housing
1800 Watt
220/240V~50Hz
IPX4
Aluminium
Aluminium
114,8x20x4,8 cm
6,8 kg
Outdoor
Heatpanel 2400 (RC)
2400 Watt
Aluminium
114,5x20x4,8 cm
8,2 kg
37