Safety Warnings - Festool CARVEX PS 420 EBQ Notice D'utilisation

English
Contents
1 Symbols..................................................... 16

2 Safety warnings.........................................16

3 Intended use..............................................17
4 Technical data........................................... 18
5 Parts of the machine.................................18
6 Operation................................................... 18
7 Settings......................................................19
8 Working with the electric power tool........20
9 Service and maintenance..........................21
10 Accessories............................................... 21
11 Environment.............................................. 22
12 General information.................................. 23
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
Wear protective gloves.
Connecting the mains power cable
Disconnecting the mains power cable
Do not dispose of it with domestic
waste.
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
Tip or advice
Handling instruction
16
Safety class II
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Machine-specific safety notices
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting ac­
cessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric
shock.
Use clamps or another practical way to se­
-
cure and support the workpiece to a stable
platform. Holding the workpiece by hand or
against your body leaves it unstable and
may lead to loss of control.
Festool electric power tools must only be
-
installed on work tables provided by
Festool for this purpose. If the tool is in­
stalled in another, or self-made, work ta­
ble, it can become unstable and result in
serious accidents.
- Wait until the power tool has come to a
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
- Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
- The saw blade on the jigsaw must always
be running when it makes contact with the
workpiece.
-
Wear suitable personal protective equip­
ment: Ear protection, protective goggles,
dust mask for work that generates dust,
protective gloves for working with rough
materials and for changing tools.