Battery Pack; Safety Instructions; General Safety Instructions; Machine-Related Safety Instructions - Festool CARVEX PSC 420 EB Notice D'utilisation D'origine

C A R V E X
GB
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating (only NiCd, NiHM)
Charging times for
Permitted charging temperature range
Temperature monitoring

Battery pack

Voltage
Capacity
Weight
5

Safety instructions

5.1

General safety instructions

WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
– Hold power tool by insulated gripping
surface, when performing an operation
where the cutting accessory may con-
tact hidden wiring. Cutting accessory con-
tacting "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
– The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, sensory
or mental ability or without sufficient
experience and/or knowledge, unless
they are supervised by a person re-
sponsible for their safety or have been
instructed on how the charger or power
tool is to be used.Children should always
be supervised to ensure that they do not
play with the charger or the power tools.
– Festool electric power tools must only
be installed on work tables provided by
Festool for this purpose. If the tool is in-
16
All manuals and user guides at all-guides.com
LiIon 1.5 Ah/ 3.0 Ah, 80 %
LiIon 1.5 Ah/ 3.0 Ah, 100 %
BPS 15 Li
14,4 V
2,6 Ah
0,58 kg
BPC 15 Li
14.4 V
3.0 Ah
0,55 kg
stalled in another, or self-made, work table,
it can become unstable and result in serious
accidents.
– Wait until the power tool stops com-
pletely until placing it down. The tool can
become entangled and lead to a loss of con-
trol of the power tool.
– Do not open the battery pack or the charger.
Even after disconnection from the mains,
there is still a high capacitor voltage inside
the charger.
– Make sure that metal objects (such as metal
chips) or fluids do not enter the machine
through the battery pack retaining slots
(danger of short circuit).
– Do not charge battery packs from other
manufacturers. The charger is designed for
charging original battery packs only. Never
charge the battery packs in chargers from
other manufacturers. Otherwise there is a
danger of fire and explosion.
– Protect the battery pack from excessive
heat or constant heat sources such as
sunlight or naked flames. There is a risk
of explosion.
– Never use water to extinguish burning
li-ion battery packs, always use sand or
a fire blanket.
– Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
– Always place the pendulum jigsaw on the
workpiece with the saw blade running.
TRC 3
220 - 240 V ~
50/60 Hz
7.2 - 18 V=
max. 3 A
approx. 0.06 A
approx. 25/ 55 min
approx. 35/ 70 min
-5 °C to +45 °C
via NTC resistor
BPC 18 Li
18 V
2,6 Ah/ 3.0 Ah
0,67 kg