Auriol 101503-14-01 Instructions D'utilisation Et Consignes De Sécurité page 8

Adjusting the Fastener (Fig. D)
Note: The fastener
adjust the fastener
the spring bar together with the slider
Open the fastener
Keep the spring bar squeezed together (as described above)
and adjust the fastener
Release the spring bar so that it can snap back into the original
position. The fastener
Removing Segments (Fig. E)
Note: The segments which can be removed are marked with an
arrow (see Fig. E). They are connected together with pins. These can
be pushed out in the direction of the arrow with the repair set
a pair of tweezers if necessary in order to remove the pins.
Place the watch with the dial facing downwards in the repair set
8
Remove the pins of the segment that you wish to remove (as
8 GB/IE
101503_SE_DK_NL_BE.indd 8
is held in position by a spring bar. In order to
6
, place the watch in the repair set
6
6
.
.
9
.
as desired.
6
is now fixed in place.
6
and press
8
. Use
8
8/6/2014 11:40:57 AM