Product Overview - Antari FT-200 Fire Training Mode D'emploi

Product Overview

Timer / Volume Control
Knobs
Breaker
PowerCON TRUE1 Waterproof Connector
XLR 5-Pin DMX Connector
Wire Remote Socket
Wireless Receiver
Setting Up
IP33 RATING ONLY WHEN OPERATED UPRIGHT / VERTICAL POSITION.
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm
of open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to suitably rated power supply. To determine the power
requirement for the machine refer to the label on the back of the machine.
4