Product Overview - Antari F-7 SMAZE Mode D'emploi

Product Overview

Control Options：DMX、W-DMX
XLR 3-Pin DMX Connector
XLR 5-Pin DMX Connector
Neutrik PowerCon
Setting Up
Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm
open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to suitable rated power supply.To determine the power
requirement for the machine refer to the label on the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 6 mintues.
Once the machine has reached operating temperature, the display will show Ready to Fog.
Now the machine is ready for operation.
Step 5: To start making fog, press the VOLUME button on the control panel.
5
Blue LCD screen, Timer
mode, Volume mode
Tank Capacity：5 liters