Antari FT-200 Fire Training Mode D'emploi page 5

Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximately 7.5
mintues. Once the machine has reached operating temperature, the LCD display will show
"Ready To Fog". Now the machine is ready for operation.
Step 5: To start making fog, locate the rotary knob on the right side of control panel, and
press the rotary knob to start making fog.
Step 6: To turn off the machine, press rotary knob button again and turn Powercon to the
OFF position.
Operation
Control Panel Operation
The machine can be operated with the onboard digital control interface.
Operation - Timer Mode
Rotary knob
Left
Right
Right
Action
Press once
Press second time
Rotate
5
Description
Activate timer mode
Deactivate timer mode
Adjust output volume