Antari FT-200 Fire Training Mode D'emploi page 8

Wireless Receiver
Registering a transmitter
Transmitters can be paired or deleted from the receiver. Each receiver can pair up to 5
transmitters. Follow the steps below to pair or delete a transmitter from the receiver.
Step 1: Press and hold the left rotary knob for 3 seconds to enter setting menu.
Step 2: Rotate the rotary knob to find the "Wireless Detect" menu.
Step 3: Follow the menu instruction to pair or delete a transmitter.
Transmitter battery replacement
If the effective distance seems to decrease, it is possible the battery level is low and requires
replacement. In order to replace the battery, undo the three screws on the back of the
transmitter to release the cover. Replace with same type and specification of battery which is
27A 12V
DMX Connector Pin Assignment
The machine provides 5-pin XLR connectors for DMX connection. The diagram below
indicates pin assignment information.
8