Product Overview - Antari F-1 Fazer Mode D'emploi

Product Overview

Blue LCD screen, Timer
mode, Volume mode
Wireless Remote / WDMX
Wireless Solution
XLR 5-Pin DMX Connector
XLR 3-Pin DMX Connector
Power ON / OFF
Neutrik PowerCon
Both Wireless Remote and Wireless DMX are Optional and not included
Optional Wireless Remote Add On Kit: WTR-10
Optional Wireless DMX Add On Kit: W-DMX-PCBR
Setting Up
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm
of open space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to a suitably rated power supply.To determine the power
requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
5
Breaker