Before You Start; Charging The Battery; Beeps - SilverCrest SBTH 4.1 A1 Mode D'emploi

Before you start

Charging the battery

Before the first use or whenever the built-in battery is empty, charge it as
follows:
 Connect the USB charging cable (B) to the USB charging port (7) and to a
free USB port of your powered-on PC. Or use a USB power adapter (not
supplied).
 The LED (8) will light orange during charging. When the battery is fully
charged, the LED (8) will light blue.
When the battery becomes weak, the LED (8) flashes orange once every 20
seconds and 4 beeps can be heard at the same time.
Please note that the battery will only reach its full performance
after 4-5 charging/discharging cycles.

Beeps

On certain events, the headphones emit acoustic signals. The table below tells
you what they mean:
Event
Power on process
Power off process
Pairing successful
®
Bluetooth connection
established
Incoming call
Minimum volume reached
Maximum volume reached
Weak battery
SilverCrest SBTH 4.1 A1
Beep
Melody
Melody
Melody
Melody
Ring tone
Beep
Beep
4 beeps every 20 seconds
English - 71