Lenz Digital plus LH101-R Instructions D'utilisation page 29

29
Now switch on the LH101-R using
the switch on the back.
E
When you use the LH101-R for
the first time, it automatically
connects to the LTM101 receiver.
During the connection process
you will see these indications in
the display:
After a few seconds, the message
appears that the connection was
established successfully.
At the first start-up, the displays are in German. You can later select
"English" in the language settings.
The hand controller then displays
the last controlled locomotive
address. The first time the
locomotive is put into operation,
address1 is displayed.