Connect Another Ltm101 - Lenz Digital plus LH101-R Instructions D'utilisation

32
•
•
5

Connect another LTM101

For instructions on how to set the XpressNet address of the LTM101,
see the section "Setting the XpressNet address on the LTM101
receiver" starting on page 37.
Always operate two LTM101s connected at the same time
at least 50 cm apart.
After these 3 seconds have elapsed, the LED on the
LTM101 starts flashing. The receiver will now search
for LH101-R units to be reconnected for one minute.
Switch on the LH101-R with the M button pressed.
The LH101-R automatically disconnects from the
previous LTM101 and connects to the new flashing
LTM101.
As soon as the connection is made, the LED lights up
permanently.
Information Set LH101-R