Troubleshooting; Declaration Of Conformity - Pattfield Ergo Tools PE-ARM 3440 Li Traduction De La Notice Originale

Troubleshooting

Caution! Make sure the appliance is switched off and the batteries are removed. Al-
ways wear protective gloves.
Problem Possible cause
Motor does not Battery empty
run
Unsuitable cutting areas
Blade is blocked
Battery is not inserted correctly
Release key is not inserted
correctly
Wrong cutting height
Motor power Wrong cutting height
drops
Discharge chute is blocked
Poor and uneven cut
Collection bag is Unsuitable cutting areas
not filled suitably
Poor and uneven cut
Collection bag is full
Discharge chute is blocked
If the device still does not work, please contact your local HORNBACH store or write an email
to: service@hornbach.com
142 EN
Solution
Recharge battery
Start on short or already mown grass.
Clean discharge chute and housing
(blade must rotate freely)
Remove batteries and insert again
Re-insert key and push it to the right
while lifting the on/ off trigger
Set the wheels to the correct cutting
height
Set the wheels to the correct cutting
height
Clean discharge chute and housing
(blade must rotate freely)
Replace the blade (contact service)
Set the wheels to the correct cutting
height
Allow lawn to dry
Replace the blade (contact service)
Empty the collection bag
Clean discharge chute and housing
(blade must rotate freely)

Declaration of conformity

We declare, that the product
described in Technical Data:
40 V Battery Lawn Mower
PE-ARM 3440 Li
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
Outdoor Directive 2000/14/EC and
2005/88/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
and in accordance to the following applicable
harmonized standards:
EN 60335-1:2012+A13
EN 60335-2-77:2010
EN 62233:2008
EN 55014-1:2017
EN 55014-2:2015
The conformity with the Machinery Directive
is verified by the conformity assessment pro-
cedure according to the Directive 2006/42/
EC.
The conformity with the Noise Emission of
Outdoor Equipment Directive is verified by
the conformity assessment procedure ac-
cording to annex VI, Directive 2000/14/EC &
2005/88/EC.
Measured sound power level:
93.7 dB(A)
Guaranteed sound power level:
96 dB(A)
Notified Body:
TÜV SÜD Industrie Service GmbH
Westendstrasse 199
80686 München / Germany
Notified Body No.: 0036
Cert. No.: OR/051748/001
Andreas Back
Head of Quality Management, environment
& CSR
Person authorised to compile the technical
file
Bornheim, der 14.06.2019
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
EN 143