Troubleshooting - Pattfield Ergo Tools PE-ARM 36 Li Traduction De La Notice Originale

8. Troubleshooting

Fault
The motor fails
to start
The motor
performance
drops
Cutting is irre-
gular
Notice! For protection, the motor is equipped with a thermal
switch which cuts out when the motor is overloaded and swit-
ches on again automatically after a short cooling period
Anl_PE_ARM_36_Li_SPK7.indb 299 Anl_PE_ARM_36_Li_SPK7.indb 299
Possible causes
a) Battery is not correctly
inserted
b) The connectors have
become separated from
the motor
c) The mower is standing in
high grass
d) The mower housing is
clogged
e) Safety switch is not in-
serted
a) The grass is too high or
too damp
b) The mower housing is
clogged
c) The blade is severely
worn
d) Battery performance de-
creasing
a) The blade is worn
b) Wrong cutting height
- 299 -
Remedies
a) Remove the battery and
reinsert (see 5.)
b) Have repaired by the
Customer Service Center
c) Start in low grass or on
an area that has already
been mowed; change the
cutting height if necessa-
ry
d) Clean the housing so
that the blade moves
freely
e) Insert safety switch (see
6.)
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
d) Check the battery per-
formance and charge the
battery if necessary (see
6.)
a) Replace or resharpen
the blade
b) Correct the cutting height
GB
07.12.15 13:37 07.12.15 13:37