Product Overview; Intended Use; Adjustments; Using The Appliance - Pattfield Ergo Tools PE-ARM 3440 Li Traduction De La Notice Originale

1
2
3
4
5
6
7
8
1
2.
1.
136 EN
15
14
13
12
11
10
9
1.
1.
2
2.
2.

Product overview

1x
1 On/ off trigger
2 Release key
3 Filling indicator
4 Cable clip
5 Safety flap
6
Main handle
7 Battery cover
8 Wheel
9 Cutting blade
10 Height adjustment lever 1x
11 Lower bar
12 Collection bag
13 Locking lever
14 Upper handle
15 Handle

Intended use

1x
The appliance is intended for mowing grass
and lawn areas in private outdoor environ-
ment. The appliance is not intended for com-
mercial use.
Any other use (e.g. trimming or mowing of
bushes, hedges, climbing plants, roof gar-
dens or balcony boxes, as well as chopping or
shredding) or modification to the appliance is
considered as improper use and could cause
considerable dangers.
DE Lieferumfang
FR Etendue de livraison
IT Materiale compreso nella fornitura

Adjustments

NL Leveringsomvang
SV INSTALL HANDLE Leveransomfång
1 Install the lower bars 11 onto the
CZ screws on both sides. Fix with the lock- Rozsah dodávky
ing levers 13 and washers.
SK Rozsah dodávky
Caution! Make sure the appliance is
RO switched off and the batteries are Volumul livrat
removed.
GB Scope of delivery

Using the appliance

1x
Caution! Before starting to use the
appliance, check the blades and fas-
tening elements for damage. Do not use the
appliance if anything is damaged.
1. The appliance is equipped with a safety
button 2. In order to switch on the appli-
ance, plug in and push the safety button
2 to the right and hold it, tilt the appliance
backwards and lift the on/ off trigger 1x
towards the handle. The safety button
snaps in and stays locked until the on/ off
trigger 1 is released.
2. Keeping the on/off trigger 1 lifted, wait until
the appliance has reached full speed.
3. Place both hands on the upper handle 14,
return the appliance back to the ground and
slowly start pushing the appliance forward.
4. Start mowing in parallel lines. For a better
result, repeat the process in a 90° angle. 1x
5. To switch off the appliance, release the on/
off trigger 1. Wait until the blade has come
to a complete stop before proceeding with
further actions.
2 Fix the upper handle 14 on both sides
with the locking levers 13, washers
and screws. It can be installed in two
positions.
Caution! Never use the appliance
with open locking levers.
EN
1
2
137